Risk Assessment Template for Wallpaper Installation.
WRITTEN SAFE WORK PROCEDURE.
1. OBJECTIVE.
1. To prevent injuries to employees and / or property damage
incidents.
2. PROCEDURE
1. Do pre-use inspection of all equipment to be used and replace
or repair faulty items.
2. Use trained competent employees only.
3. Use appropriate Personal Protective Equipment i.e.:
- Hardhat.
- Safety boots.
- Overalls.
- Ear Protection.
- Masks
- Safety Glasses
- Hand gloves
WORK INVOLVING IN THE ACTIVITY.
2.1. Appropriate PPE must be worn by all workers on site & special PPE should be provided for those who are directly involved in this activity.
2.2. Site Induction and toolbox talks should be given prior
to starting job.
2.3. The equipment to be used should be inspected and must
be safe for use.
2.4. Materials be properly secured while being transported
and during offloading.
2.5. Employees shall be educated in keeping out of possible
crush of wall or collapse of the excavation.
2.6. All the underground utility services must be protected
and secure.
2.7. Permit to work system should be followed by all
supervisors and engineers.
2.8. Daily, weekly, and monthly inspection to be done
regularly any defect found must be reported immediately.
2.9. Physical barricade to installed and maintained with
entry and exit points.
2.10. Only personnel involved in the activities are allowed
inside the barricaded area.
2.11. Enforce the use of competent persons only.
2.12. All hand and power tools must be inspected before
use
2.13. All hand and power tools must be safe for use
2.14. All type of power tools must be color coded and tagged
as safe for use and must be entered in the register.
2.15. Permit to work system should be in place.
2.16. PPE should be worn by all operators as per the job
nature.
2.17. Maintain work area isolated with means of barricade
and appropriate signage should be in place.
2.18. Remind personnel through toolbox talk to observe proper
positioning when working
2.19. All the work should be done under competent
supervision.