Form-work system- Golf Scaffolding System
Loading ... Civil Engineers Blog

top page

Latest News

top post page

Home Form-work system- Golf Scaffolding System

Form-work system- Golf Scaffolding System

Font size





Form-work system . Part-01

We will show to you in this module one of the most form-work system used in Middle East areas from 1989 which is Golf Scaffolding System.


Golf Scaffolding Products.

Golf Scaffolding produce many kinds of Form-works and scaffolding systems, but we will explain only in this module the below systems:
     
      1-     PS system/GC system/Cup-lock.
      2-     Shorelok/Ring Lock system.
      3-     SPF-50 system.
      4-     Aluminum system / Perfect Aluminum Panels.
      5-     Eco-form system.
      6-     Table system.


     1- Cuplock System.


     Cuplock system is a multi-purpose steel scaffold system suitable for providing general   access and supporting vertical load. The system’s key feature is its unique circular node   point which allow up to 4 horizontals to be connected to a vertical in a single fastening   action making it probable the fastest and safest system available.

The comprehensive range of Cuplock scaffold components allow it to be used for various construction application. It can be used to create a wide range of support structures, access scaffolds, staircase tower, circular scaffolds, loading tower, and mobile tower.

Cuplock scaffold is mainly used for falsework support structures. Its high leg load and wide range of components gives the system the capacity to take virtually and soffit support application with a cost-effective solution.

For formwork support, a wide number of grid variations can be created to suit differing load requirements.


PS/GS/Cuplock elements.

Decking beam. 



It is the primary beam and used with the drophead to form the decking system.

Made from sheeted components.

Come with length 1.2 m, 1.8 m, and 2.5 m.

Infill beam.



Used to span between the decking beams to support the plywood.

Made from sheeted components.

Have variable length from 0.50 to 1.70 m.

Drophead.



Drophead offers the facility for early skirting of the formwork. The wedge plate on the drophead can be conveniently struck so that the drophead remain in position to support the slab.


2- Shorelok / Ring Lock system.



Ring Lock system is the first choice in modular access, load bearing and heavy-duty shoring. With various well-designed size in verticals (standards), horizontals (ledgers) and an extensive range of accessories.

Ring Lock is the most in demand modular scaffold system which can provide major saving in labor cost while meeting the requirements for safety provides perfect adaptability to irregular layout with ease o assembly and low cost.

Option for finish are available in painted or galvanized.

The Shorelok rosette provides flexibility to lock in several angles. Plus, quickly, and accurately aligns 45 degree and 90 degree using the notch position.

Up to 8 connections are present in one plane which enables the system to cover various shapes of structures rigidly and safely.

Standard.

The Shorelok vertical are available to suit any propping or access application economically. The innovative rosette is set at 500 mm vertical intervals for maximum versatility in use.

The verticals are drilled for the fixing of the spigot joint. Two series of standard are produced to suit various applications. The 60.3 mm outer diameter standards can be used efficiently for heavy loading applications especially in bridges or transfer slabs. While the 48.3 mm outer diameter standards can be used for normal load bearing and access applications.

Ledger.

Horizontals are available in various standard sizes or if required. Can be made a special length.

Ledgers are compatible with the two-standard series.


            3- SPF-50 system.



The most important aspect of successful structural construction is the formwork system.

The SPF-50 system will always offer the most trusted, secure, efficient, and cutting edge of formwork technology for various structures.

The SPF-50 system is an ingenious small-panel designed for cost-effective forming of concrete elements.

The SPF-50 system is a complete, crane-independent formwork system enabling the shuttering of all structures to perfection in an inexpensive and cost-effective manner. All the panels belonging to this system are relatively light and handy that they can be handled and fitted by a maximum of two people.


            4- Perfect Aluminum Panels.



      The perfect Aluminum panel system is a result of extensive research.

      Decades of experience in the form work industry is reflected in perfect aluminum panels.

      Low weight and high strength form work is outcome. 

      A special profile made from a robust aluminum alloy provides the perfect aluminum                
      panels with its high level of rigidity and versatility.  

      In combination with high quality 15 mm thick sheathing of birch plywood and plastic              
      overlay, the system can absorb high concrete pressure without any problems.

      Its robust design makes it an ideal form work for the modern construction industry.


    5-  Ecoform.



        Ecoform system is the prevailing system when jobs require quick and economic                     
       form work.

        The system adapts minimum number of strand form-work elements.

       The versatility of the system enables Ecoform to be erected for any floor geometry.

        Beam also can be formed efficiently with Ecoform.


    6- Table system.



       Table form work is the perfect light weight form work system specializing in floor                     
       concreting and it is widely used in high buildings and skyscrapers, multi layer                        
        industrial  factory building, substructures and other.

        Table form work adapts to any slab type. It is perfect for building construction projects            
        with high demands for finishing quality, safety, and efficiency.

        The form work can meet the geometry of most structure and it can also be used                    
        cantilevered edge with bracing. The table form work is easy and practical to set up                
        and can be shifted and adapted very quickly.

        This makes the system a cost-effective and efficient way of carrying out large area               
        slab projects.

        Table form work system is fast moving and can be transported using the transportation           
         trolley from floor to floor with ease comfort with the fork in a vertical position.





No comments
Post a Comment